Topical:
Our data M Newsletter (InfoForum)
"Roll forming" special edition
January 2008 - PDF 2,32 MB 
go to the newsletter archive

data M´s next shows and seminars (excerpt):
September 2008: TUBE CHINA 2008, Shanghai / China
October 2008: EuroBlech 2008, Hannover / Germany
click for all detailed events...

COPRA® MetalBender for AutoCAD 2009 and Inventor 2009 is now available:
Beside the technical necessary adjustments to the newest Inventor and AutoCAD versions from Autodesk, the functionality of COPRA® MetalBender TD·i was also extended.
The TD·i - Library is extended by the flexible pipe run (see picture).
If you have any questions or need more information please do not hesitate to contact us. We are looking forward to hearing from you.   ...contact data M  

Exhibition TUBE 2008 in Düsseldorf successfully concluded:
data M Software GmbH would like to thank all visitors for the friendly conversations we had at the Tube 2008 in Düsseldorf.
We are happy to say that the new version – COPRA® FEA RF 2008 – our Finite Element Analysis software for the Roll Forming Process has met your special interest. We hope to see you again at the next Tube exhibition, which will be held in two year’s time.
...info about the exhibition Wire 2008
Your data M team

Profiltechnik Söll moves ahead with data M:
With a roll scanner from data M, roll forming software and various other design and manufacturing modules, Profiltechnik Söll GmbH in Pausa,Vogtland has created a modern center for fabricating rollformed aluminum profiles and tubes. Supported by this innovative CAD/CAM solution, it was possible to cut the time needed to develop and design the roll tool set and generate the engineering documentation from at least two months to just two days.   ...more info (PDF 303 KB)   or   ...contact data M 

Innovative data M software solution helps create new product range:
In its new manufacturing process for free-form standing seam profiles called Kalzip XT, Corus Bausysteme GmbH based in Koblenz developed an entirely new roll forming technology that enables it to fabricate profiles of virtually any geometry. The complex and innovative roll forming concept is controlled and supported by software from data M.        ...more info (PDF 805 KB)   or   ...contact data M 

Producing discontinuous roll formed profiles:
data M Software offers you a new method for fabricating stress-matching profiles.               ...more info (PDF 642 KB)   or   ...contact data M  

New roll scanner types:
COPRA® RollScanner 100-3 and COPRA® RollScanner 80-3:
The COPRA® RollScanner is a fully automatic measuring device for inspecting existing rolls quickly and accurate. It works contactless so it satisfies the rollforming industry’s big demand for a high-quality control system. There are two new versions available: type 100-3, which is for rolls that have a max. roll diameter of 280 mm and type 80-3 for rolls with a max. diameter of 200 mm. Both have the same wide functionality as type 200-3, but they are smaller (measures: 1mx0.8mx1.65m / weight: 600 kg) and cheaper. The COPRA® RollScanner can be handled very easily and doesn't require computer experience. The focus axis is standard for both versions, so the RollScanner is able to measure all kinds of rolls up to a weight of 150 kg.
...more info (PDF 835 KB)   or   ...contact data M   or   http://rollscanner.datam.de 

New Release - COPRA® RF 2007 software version:
data M introduced the new software for roll forming "COPRA® RF 2007" at the EuroBlech 2006 in Hannover, Germany. "COPRA® RF 2007" will be available in March and is then supported by the new AutoCAD version. Roll forming tools in Autodesk's Inventor Series 11? At the EuroBlech 2006 data M  introduced a new interface of COPRA® RF for Inventor...
For further information about the new features please click for   ...more info (PDF 2,5 MB) (Release Notes)   or   ...contact data M  

COPRA® Software Maintenance:
A software maintenance agreement enables you to receive new updates automatically and without further cost. With this you secure the full value of your investment and you influence our new developments.   ...more info (PDF 1,3 MB)   or   ...contact data M  

COPRA® Hotline Support:
We assist you not only via e-mail, fax and phone but also online. With it our support team is “on the spot”. Additionally you can also phone us via Internet. We are using Skype. More information you will find at  www.datam.de/help/index.htm   or   ...contact data M  

New Lasercheck versions: 
COPRA® LaserCheck 6 and COPRA® LaserCheck TT available:
The new fully automatic laser-based bending angle measuring device for press brakes got reengineered and it is in the version 6 out now. The new features comprehend for example a higher-resolution USB-camera and a drive computer with Windows XP embedded without a disk memory. There are new features for operation of tandem-machines, a faster interface to the Delem control unit and the connection to Simotion with BendingOffice®. Revised is also the spring back measurement. The new system has a twice as high resolution, which allows you to get accurate measures, also when there are only small bending forces used. The LaserCheck TT is the new version for mounting in the upper die. Its mounting is like the one of a tool kit and it has an adapter for all other normal tool types. In oder to use the LaserCheck TT the machines doesn’t have to be changed - perfect for refitting.   ...more info (PDF 1,5 MB)   or   ...contact data M   or   http://lasercheck.datam.de

Available at data M - CncKad - CAD/CAM that speaks your language:
data M now provides you with the CAD/CAM software solution of METALIX CAD/CAM Ltd.
The CAD/CAM that speaks yours and the language of your machine.

- Supports the entire design to production cycle

- Jobs can be ported to a different machine and/or technology with a few mouse clicks

- Variety of Punch, Laser, Plasma and Flame machines supported

- Optimal material utilization with AutoNest best fit nesting solution

- Advanced technology combines drafting and processing in the same module

- Create efficient CNC programs with precision and ease
- Interface to Autodesk products Inventor and AutoCAD   ...contact data M

data M Software has become Autodesk Inventor Certified Application Partner:
As of July 19th, 2002 data M Software´s solution COPRA® MetalBender TD·i is an Autodesk Inventor Certified Application. This gives your customers the safety of investing in an Autodesk-tested product which fulfills highest standards. CMB TD·i is 100% integrated into the Inventor workflow and will be continually developed and upgraded by data M. Your customers get the ideal add-on solution for any sheet metal requirement not covered by the Inventor functionality. data M continues to be "preferred provider of sheet metal engineering functionality in Inventor" and has supported Autodesk in developing the sheet metal functionality offered by Inventor.

New application for Inventor: COPRA® MetalBender TD·i :
data M announces a new web site for sheet metal design: www.copra-metalbender.com.
data M, Autodesk’s “preferred supplier for sheet metal technology for Inventor“ is presenting a new version of its “COPRA® MetalBender“ software with increased functionality like “Sheet Metal Lofting“ or an extensive “parts library”. The new COPRA® MetalBender for Inventor completes data M’s range of sheet metal application programs for Autodesk’s AutoCAD, Mechanical Desktop and Inventor Series.     ...Press Information